Note: Not all buttons on your TCL Roku TV remote can be programmed to the buttons on your cable or satellite remote. If your code is not listed here please contact your provider. TCL must rely on these companies to provide their codes. These codes come from the TV remote cable providers. Look for your provider and the remote code from the table below, and use the instructions from your service provider to program your cable and satellite remote. The device LED will blink twice to confirm that the code has been stored.In many cases, you can program your cable, satellite or universal remote to control certain functions of your TCL Roku TV. STEP-4: Store the three-digit code by pressing the same button once again. If any of the functions do not operate as they should, repeat the instructions from STEP 3 above using the next three digit code number from the brand list. volume, mute, etc.) to ensure you have the correct code. Then try all of the functions on the remote control (i.e. *Note : You can verify that you have selected the correct code by pressing the button. If there are more than one three-digit number listed for your brand, try one code number at a time until your equipment turns off. STEP-3: Point the remote control toward the equipment and enter the three digit universal remote code number assigned to your brand from the code tables. The next step must be entered while the LED is on. The corresponding device LED will turn on indicating that it is ready to be programmed. STEP-2: Press the button and the button simultaneously for three seconds. STEP-1: Turn on the equipment that you want the remote control to operate (Cable Box, TV, VCR, DVD, etc.). Program CLIKR-5 universal remote with 3-Dight Code Method VCR : VCRs and TV/VCRs Quick Setup Codes Button PressĪUX: Audio Equipment, Media PC, etc. Quick Set-up Code Tables TV : Televisions Quick Setup Codes Button Press *Note : If the matching code could not be found in STEP3, use 3-Digit Code Method or Auto Search Method. The remote control is now ready to control your TV. STEP-4: Once the TV has turned off, press the TV button once again to save the code. *Note : The remote will exit the programming mode automatically if it does not have matching codes and the LED will turn off. If it does not, press the same number button repeatedly until the TV turns off. STEP-3: While the TV button LED is on, pointthe remote control at the TV and press the number button assigned to your TV brand as shown in the table (e.g. The TV button LED light will turn on for 30 seconds confirming that you are in the program mode. STEP-2: Press and hold simultaneously for 3 seconds both the TV and A (Yellow) buttons or B (Blue) buttons, based on the column your TV brand is assigned to. STEP-1: Manually turn on the TV you wish to program. Simply press the number buttons 0 through 9 that your TV brand is assigned to using the following four steps. It’s easy to program the CLIKR-5 remote control to operate your TV. you will need CLIKR-5 universal remote codes to program devices, we have listed CLIKR-5 3 digit universal remote codes. Home entertainment devices such as TV, blu-ray, television, DVD player, VCR, stereo systems can be programmed with CLIKR-5 universal remote. Programming your CLIKR-5 universal remote with CLIKR-5Universal Remote Codes will allow you to operate multiple devices with one CLIKR-5 remote. Program Universal Remote CLIKR-5 UR5U-8780L & UR5U-8790L
0 Comments
Leave a Reply. |